Indoor carcover Ferrari FF with mirrorpockets

Indoor carcover Ferrari FF with mirrorpockets

Indoor carcover Mercedes-Benz W113 with mirrorpockets

Indoor carcover Mercedes-Benz W113 with mirrorpockets

Tailored car cover Ferrari F8 Tributo 2019-current with mirror pockets

The best fit The best price vs quality The best materials 5 Years waranty Long lasting cover


A tailor made car cover for Ferrari F8 Tributo 2019-current. The Star Cover car cover protects the Ferrari while stalled in the garage against dust, dirt, knocks and minor scratches. Is your car parked on the road or under a carport? Consider using an outdoor car cover.

BEST FIT CAR COVER FOR YOUR Ferrari

Tailor made for Ferrari F8 Tributo. The optimal fit for your car.
Handmade of sustainable materials with a material density of 180-190 grams per m2.
Stretch, anti-static, dust and dirt repelling. Optimal breathability of 5000 g/m2/d to prevent condensation.
2-Layers, 4-way stretch car cover, woven combination of stretch lycra and polyester. Outside smooth, inside soft and scratch free to protect the paint of your car.
Dirt and dust repelling, protects agains minor scratches on your Ferrari paint.
Luxury appearance with mirror pockets. Easy to install by 1 person, comes with a luxury and strong storagebag

Why Star Cover indoor car covers are the best choice? Read more >

Ferrari cover | F8 Tributo tarpaulin | Indoor car cover | Snug fit protection

As low as £161.16
SKU
44-bm3-mp-ferr-f8-tri-2019-rent

Luxury car covers with mirror pockets developed to fit Ferrari F8 Tributo

Our Star Cover car cover tailored for the Ferrari F8 Tributo and have perfect positioned mirro sleeves for your F8. The mirror pockets look beautiful and have a luxurious appearance. Car covers with mirror pockets not only look great, the also make it even easier to apply the cover, just position the sleeves before pulling the cover all over the car.

Star Cover indoor car covers have clear labels in the front and back of the cover, and therefor are always easy to apply. Also washing instructions can be found on these labels. The protectable garage covers are hand made from long-lasting, sustainable materials, the stitching is strong and the covers have an elastic front and rear to ensure the best fit. Some extra stitches around the mirror sleeves ensures a long lasting cover.

5 Years waranty on our Star Cover car covers

  
Clear label with productinfo and washing instructionsNot to miss labels for the front and rear of the cover


Strong stitches and elastic bands

Pros en cons

Always a perfect fit cover for Ferrari F8 Tributo
More luxury design then a cover without mirror pockets
Clean and great looking mirror pockets
Long lasting sustainable materials used
Washing your car less often = environmentally conscious
Possible folds around the rear mirrors
More expensive then an universal cover

Star Cover car covers

These super soft, super stretchy indoor car covers are the ideal solution for those seeking a fitted car cover for their Ferrari F8 Tributo. Lycra blended, satin fabric allows the cover to cling to the car whilst its subtle sheen gives an elegant finish.Tightly knitted fabric provides excellent protection from dust and other pollutants as well as remaining breathable to prevent any build-up of condensation forming on the car.

The snug fit of these covers ensures that they do not only look great but also provide exceptional protection. Low profile seams guarantee a sleek finish whilst displaying the contours and profile of your car.

More Information
Shop price 195
Product brand Star Cover
Packing length 40cm
Packing width 30cm
Packing height 30cm
Mirror Pockets With mirrorpockets
Car manufacturer Ferrari
Build 2019-current
car_model F8 Tributo
Car model F8
Material Lycra, Polyester
Material type 4-Way stretch
Material density 180-190 gr/m2
Breatheable Yes
Breathability 5000 g/m2/d
Protection Dust, Knocks-scratches
UV protection 15 UPF
Waterproofness 0 mm
Anti theft eyelets No
Easy 1-person fit Yes
Storage bag included Yes
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Manual and tips for your carcover

Very easy 1-person installation

Indoor car cover

Outdoor car cover


Before you install the cover to your car, be sure that the car is clean, dry and free from hard bits an loose pieces. This way you maintain the car and cover in perfect conditino.


Lay down the cover on the roof of your car, the labels signal which side is front and rear. Unroll the cover over the roof to the hood and tail of the car.




Now you can unfold the sides of the cover by flaping them open. First pull the front of the cover around the nose of your car, then do the same on the rear of your car.


Tips for a longlasting cover



Make sure your antenna is hidden or removed, this will keep the antenna from making a hole in the cover eventually. If you drive a convertible, close the roof before installing the cover.
Please let remove the cover once per month to let some fresh air to the car and cover, this way any condens will slip away.



The motor and exhaust are cooled down, after washing the car or rain, make sure the car is dry before installing.

Material properties of the Star Cover indoor stretch cover

Star Cover indoor car covers are made of a 2-layer woven combination of stretch lycra and polyester. The inside of the cover is made of a scratch-free fleece material, which feels extremely soft. The outside is made of a shiny polyester, which provides protection and makes the cover strong.
Because the fabric is woven in 2 directions with super technology, it becomes 4-way stretch . This means that the material is stretchable both horizontally and vertically, the cover follows the curves of the car. Which makes for a very breathable cover with a tight fit. The breathability of the cover is 5000 grams per m2 per day. Which stands for very high breathability, the highest in its segment and very good protection against condensation.

180-190 g / m2 material density

Star Cover car cover is manufactured with a material density of 180-190 grams per m2 . This makes the cover very durable and lightweight, yet extremely strong in combination with the weaving technique. The cover has a UV resistance of 15 UPF which stands for limited protection, which is more than sufficient for storage in a closed greenhouse or garage. The cover basically has the color of the raw materials, but the cover gets a color by means of pigment paint. This color penetrates the fibers, but does not make the fibers unnecessarily stiff, this method of dyeing has the possible disadvantage that the cover can discolour after exposure to UV light.

Breathability index

The breathability expressed in the number of grams of moisture that can pass through the material per square meter within 24 hours. Either condensation and moisture that can disappear under the cover.

Breathability <800 g / m2 / d
Offers low breathability and closes the car completely, there is a great chance that condensation will remain under the material.

Breathability 800-3000 g / m2 / d
Medium breathability, we often see in sail covers.

Breathability> 3000 g / m2 / d (Star Cover cover)
Very high breathability, whereby condensation and moisture generated under the cover are well diverted. Within 24 hours, approximately 5000 grams per m2 of moisture is evaporated, which minimizes the risk of damage.

UV protection index

How much harmful UV radiation does a material filter?

UPF <15
Offers limited protection against ultra violet light and can cause visible damage to objects covered under the material.

UPF> 15.20 (Star Cover cover)
Offers good protection and absorbs significantly more than UPF <15 materials.

UPF> 25,30,35
Offers very good protection and is often used outdoors.

UPF> 40
Offers excellent protection and filters most of the Ultra Violet light that reaches the material, so it lets through very limited. Very suitable for outdoor use.

Condensation

Condensation occurs because water vapor comes into contact with an object (car) which is colder than the air in the environment. In this case, the moisture hits the cold surface, which creates small droplets on the surface. This effect is enhanced because metal cannot buffer condensation in any way. Every car suffers from condensation unless it is in a room where the climate can be fully controlled (heating & ventilation).

Rising moisture

This problem is also called rising damp and is caused by ground moisture evaporating and striking the surface of an object as condensation.

Material properties of the Star Cover outdoor stretch cover

Star Cover outer covers are made of a 3-layer woven thermoplastic polyurethane. The nanotechnology that is used in weaving the polyester fibers makes it possible to apply a waterproof and breathable TPU membrane . The finish of the Star Cover outdoor cover is with a Teflon (TPTFE) water-repellent coating. So not only a membrane, but also a coating contribute to the water resistance of 10,000 mm . This means that the cover is completely waterproof in the rain, but is less resistant to horizontal pressure. In combination with the breathability of 3000 grams per m2 per day , the Star Cover cover is the perfect solution for your vehicle. The cover is therefore extremely breathable so that any condensation and rising moisture will be diverted.

A completely waterproof material, which is even waterproof under water, is not breathable and is therefore less suitable for the car cover.

Because the fabric is woven in 2 directions with super technology, this is 2-way stretch . This means that the material is slightly stretchable, which improves the fit and the cover does not compromise on the protection of the car. The material density of the outer cover is 280-290 grams per m2, which ensures that the cover is extremely strong, but remains manageable in weight and size. The breathability of the cover is 5000 grams per m2 per day. Which stands for very high breathability, the highest in its segment and very good protection against condensation.

280-290 g / m2 material density

Star Cover car cover is manufactured with a material density of 280-290 grams per m2 . The cover is extremely strong, but very handy in weight and the size remains limited. The cover has a UV resistance of 30 UPF . The Star Cover cover filters Ultra Violet light with a protection factor of 30 UPF, a very good protection during long-term storage in the sun. The car cover filters UV rays and ensures that they cause as little damage as possible to the car, this however ensures that the cover will discolour over time, but the cover retains its UV-resistance. The cover basically has the color of the raw materials, but the cover gets a color by means of pigment paint. This color stretches into the fibers, but does not make the fibers unnecessarily stiff, this method of dyeing has the possible disadvantage that the cover can discolour after exposure to UV light.

Water resistance index

How much water pressure can the material take, and what is the consequence?

Water resistance 0 mm
Does not protect against moisture, the moisture runs directly through the material.

Water resistance 0 - 1000 mm
This material is slightly water-repellent, but certainly not waterproof. This has the disadvantage that it offers no protection against rain or other liquids. The advantage, however, is that it has a very high breathability in the highest category.

Water resistance 1000 - 5000 mm
This material is waterproof against rain, but cannot withstand any kind of horizontal pressure. The material leaks due to the sustained pressure on flat surfaces such as a hood or on the roof. The disadvantage is that this material offers very limited protection against rain. On the other hand, the advantage here, too, is the breathability of the highest category, i.e. good protection against condensation and rising moisture.

Water resistance 5000 - 15000 mm (Star Cover cover)
Use of this material makes the Star Cover cover completely waterproof in the rain and resistant to many forms of pressure. Only at very high, sustained pressure, for example from long-term exposure to rain and wind, can the material begin to leak. This material has the right balance between waterproofness and breathability (3000 gr / m2 / d), which is a great advantage against condensation and rising damp . Disadvantage: the cover lets water through under prolonged or extreme use.

Water resistance 15000 - 30000 mm
Completely waterproof material, which remains waterproof even under the most extreme pressure. This material remains waterproof even with shallow immersion. The disadvantage of this material is that it is not breathable and therefore offers no protection against condensation and rising moisture. On the other hand, the material is virtually impermeable to water.

Water resistance> 30000 mm
This is only for solid, non-porous materials. These materials never leak without breaking or deforming. Disadvantage: not breathable so no protection against condensation and rising moisture. Advantage: does not allow water through even under water.

Breathability index

The breathability expressed in the number of grams of moisture that can pass through the material per square meter within 24 hours. Either condensation and moisture that can disappear under the cover.

Breathability <800 g / m2 / d
Offers low breathability and closes the car completely, there is a great chance that condensation will remain under the material.

Breathability 800-3000 g / m2 / d (Star Cover cover)
Good breathability, ideal for the outer covers. This allows for the right balance between waterproofing and breathability.

Breathability> 3000 g / m2 / d
Very high breathability, whereby condensation and moisture generated under the cover are well diverted. Within 24 hours, approximately 5000 grams per m2 of moisture is evaporated, which minimizes the risk of damage.

UV protection index

How much harmful UV radiation does a material filter?

UPF <15
Offers limited protection against ultra violet light and can cause visible damage to objects covered under the material.

UPF> 15.20
Offers good protection and absorbs significantly more than UPF <15 materials.

UPF> 25,30,35 (Star Cover cover)
Offers very good protection and is often used outdoors.

UPF> 40
Offers excellent protection and filters most of the Ultra Violet light that reaches the material, so it lets through very limited. Very suitable for outdoor use.

Condensation

Condensation occurs because water vapor comes into contact with an object (car) which is colder than the air in the environment. In this case, the moisture hits the cold surface, which creates small droplets on the surface. This effect is enhanced because metal cannot buffer condensation in any way. Every car suffers from condensation unless it is in a room where the climate can be fully controlled (heating & ventilation).

Rising moisture

This problem is also called rising damp and is caused by ground moisture evaporating and striking the surface of an object as condensation.

TPU stands for thermoplastic polyurethane.

TPU is a waterproof and breathable membrane that is an intermediate product of rubber and plastic. It has good elasticity and high strength index. The material has physical properties unmatched by other materials in terms of water resistance (withstands a water pressure of 10,000 mm). TPU is an environmentally friendly polymer.